Cart
Checkout Secure
Free US Shipping

Got a Question? Call Us Toll Free

844-420-4235

Mon-Sun 9am-9pm Eastern

8 DIY Tips for How to Make a Homemade Pipe or Bong

One of the best ways to smoke marijuana is with a Pipe or Bong. A Pipe is one of the simplest yet most effective smoking devices- all you need to do is apply some weed to the bowl, light, and take a hit from the mouthpiece. A Bong is similar, only it’s usually larger and also has water in the base which cools and purifies the smoke before it hits your mouth. There are all kinds of Bongs and Pipes you can buy, but it’s also easy to make a homemade Pipe or Bong.

If you find yourself in a situation where you have weed but nothing to smoke from, homemade Pipes and Bongs always come in clutch. You’ll be surprised at just how easy it is to make a homemade smoking device, and while they won’t give you the same kind of quality a well-made glass piece will, you’ll also be shocked at just how well they work.

Once you learn how to make a homemade Pipe or Bong, you’ll realize that practically anything can become a smoking device with enough creativity. You can use ice, apples, water bottles, and even empty toilet paper rolls. Plus, making a homemade piece is incredibly quick and easy. Here are some of the best DIY tips for how to make a homemade Pipe or Bong.

What You Need To Make a Homemade Pipe or Bong

When it comes to making a homemade Pipe or Bong, you can use all kinds of items you have lying around the house. Practically everything from pieces of food to empty plastic containers can be made into a smoking tool. Common items used include apples, peppers, pumpkins, toilet paper rolls, and plastic bottles. However, there are a few items you’ll usually need to use for many types of homemade pipes.

Having a pen handy always helps. A pen can be made into a pipe itself, but pen tubes are also fantastic to use as a downstem for homemade bongs. Just make sure you empty the insides of the pen and open a hole at both sides (you may need to cut one end). Similarly shaped items like plastic straws or candy tubes can also work, but pens are usually the go-to for crafty stoners.

You’ll often need something to seal up holes in your pipe or bong to avoid letting any air out. Blu-tack or sellotape can work great for this- you can seal up practically anything using these homemade items. Alternatively, you can use chewing gum. While it’s not the most hygienic option, it works surprisingly well for sealing up the holes of your stem or attaching a bowl.

What You Need To Make a Homemade Pipe or Bong

When it comes to the bowl, you’ll need something safe to burn. Burning plastic should be avoided at all costs, and the best option is usually to use aluminum foil. Cut some holes in your foil bowl using a knife or needle and make sure to wrap it around any plastic on your homemade piece to avoid burning it. Other than that, pretty much all you need is a knife, lighter, and whatever you’re using for the base of your bong or pipe.

How Does a Homemade Pipe or Bong Work?

Homemade pipes and bongs are very simple. All you need is a hollow item (or an item you can hollow out) to refashion into a smoking device. For instance, bottles make for great homemade bongs. You can cut a hole to attach a pen-tube as a downstem, fill the base with water, make a bowl out of foil, and you already have a mouthpiece.

Some items make things even easier. When it comes to using something like a metal can, you can pretty much just poke holes in the side and you’ll have a tool that’s ready to smoke from. Some items require more creativity. For example, food items like apples can become pipes if you cut the holes in them.

Just like with any other pipe or bong, your weed goes in the bowl and smoke travels through the stem when you burn it. You can then inhale through the mouthpiece. You’ll be surprised at how many household objects can become effective pipes or bongs, providing good airflow and solid hits.

1. The Water Bottle Bong

The Water Bottle Bong is arguably the best option when it comes to homemade smoking devices. It’s the perfect shape and size for a homemade Mini Bong, plus you can put water in the base to cool your smoke. All you need are a few items you probably have lying around to make the perfect DIY bong.

Start by cutting a hole in the side for your downstem. Insert a pen tube (or any other similar kind of tube) and seal the hole using blue-tack or sellotape. Create a cone out of foil, make some holes in the bottom, and put it in the other end of your tube. As for the mouthpiece, just unscrew the cap of your bottle.

The Water Bottle Bong

Now, fill your bottle with just a little bit of water (try not to go above the downstem) and your homemade bong is ready to use. Put some weed in the bowl, light, and inhale through the top of the bottle. Water Bottle bongs provide amazing airflow and work extremely well. You can do this with any kind of plastic bottle quickly and easily.

2. The Pen Pipe

The Pen Pipe is another one of the most simple and effective homemade smoking devices you can make. Pretty much all you need is a pen, although there are a few different ways to make a pipe out of it.

The simplest method is to use a pen with a metal screw cap at the nib. Remove the cap, remove the ink cartridge, and remove the other end of the pen so you’re left with an empty plastic tube. Now, insert the cap backward in one end of the tube to use as your bowl. The other end is the mouthpiece. Seal the bowl with some blue-tack or sellotape and you’re ready to smoke.

Another option is to remove one end of the pen and take out the insides. Now, cut a hole in the side of the pen near the other end. You can make a bowl using a metal screw cap or fashion one out of aluminum foil. Seal the hole and you have a super slim and portable homemade pipe that’s ready to smoke from.

3. The Apple Pipe

As far as homemade pipes go, the Apple Pipe is a classic. Many stoners have made this when they needed something easy to smoke out of. One of the best things about the apple pipe is that since there’s no plastic to burn, you don’t really need anything but something to cut holes in it.

Take an apple and cut out the core. You’ll also need to cut out a narrow hole in the side to use as a mouthpiece. You can use a knife or a tube to cut the hole. You may also want to cut another hole to use as a carb- the hole you cover with your finger to control the airflow of your pipe.

The Apple Pipe

If the hole in the top of your apple is narrow enough, you can just pack your weed and burn it. If it’s too wide, add some aluminum foil over the top and poke a few holes in it. When you light your weed, take a draw from the hole in the side and you’ll get smooth, fruity smoke no matter what strain you use.

4. The Pepper Pipe

Another great homemade pipe you can make using something from the fridge is the Pepper Pipe. Since Bell Peppers are hollow inside, they make for fantastic homemade pipes. Although your smoke may come with a funky pepper taste, it works very well as far as airflow goes.

Take a Bell Pepper and cut a small hole in the side. Insert a tube to use as your mouthpiece. Now cut a hole in the top and remove the core of the pepper without cutting through the bottom. Cover the top with some aluminum foil, poke some holes in it, and use this as your bowl. Your homemade Pepper Pipe is ready to use.

The same approach works for many fruits and vegetables. For example, Pumpkins also make for great homemade pipes since they’re also hollow. It only takes a few household items and a few minutes to make one of these great homemade food pipes.

5. The Cardboard Roll Steamroller

A Steamroller is a type of thick glass pipe that’s open at both ends with a bowl about three-quarters of the way up. You cover one end with your hand while taking a huge hit from the other end. It’s also very easy to make one of these using nothing but an empty Toilet Paper or Paper Tower roll.

Take your cardboard roll and cut a small hole with a pen about a quarter of the way from one end. Make a cone out of aluminum foil and insert it to use as your bowl. Seal the hole in the tube with sellotape or blue-tack. 

The Cardboard Roll Steamroller

Now, light the bowl while covering one end with your palm and take a hit from the other end. Due to the wide structure of the tube, it’ll give you extra strong hits with tons of airflow.

6. The Soda Can Pipe

The Soda Can Pipe is another one of the simplest methods. All you really need is a metal soda can and a knife. The mouthpiece is already right there for you, so all you have to do is make the side into a bowl.

Make a dent in the side of your can then use a knife or needle to create holes. This is where you place your weed and light it. Inhale from the mouthpiece of the can and you’ll get smooth hits with solid airflow.

While this is one of the easiest homemade pipes to make, it’s not the best. Burning soda cans can often result in inhaling toxins due to the paint on the side. However, if you have no other options, it’s very effective.

7. The Ice Block Pipe

Another homemade smoking device that really doesn’t require much other than a knife and some water is the Ice Block Pipe. You’ll want to freeze a large block of ice using a container in your freezer.

Once you have your block of ice, you’ll need to carefully carve out a hole through the end to make a stem and mouthpiece and another hole in the side to use for a bowl. Now, just put your weed in the bowl, light, and inhale.

The Ice Block Pipe will give you incredibly smooth and cool hits. Although it can be tricky to carve the perfect pipe out of ice, you can get specially-designed molds to make things easier.

8. The Tic-Tac Bong

Last but not least, the Tic-Tac Bong is a tiny smoking device you can make using a Tic-Tac box. It’s quick, simple, and works surprisingly well for such a small homemade smoking tool.

The Tic-Tac Bong

Poke a hole in the side of your box and insert a thin tube such as a pen tube or straw. Make a bowl by rolling a bit of aluminum foil into a cone and apply it to the other end of the tube. Put your weed in the bowl, light, and inhale through the small hole at the top of the box.

It’s an incredibly simple way to make a small and discreet homemade bong. You can add some water as long as you don’t fill it up too much. But even without water, it works well for taking small yet potent hits.

Conclusion

From plastic containers to pieces of food, these are some of the best ways to make a homemade pipe or bong. However, while these methods are a lot of fun and can help you out in drastic situations, it’s best to buy a high-quality device for smoking. You can find many premium Glass Pipes and Bongs at all price ranges available for delivery at FatBuddhaGlass.com.


Older Post Newer Post


0 comments


Leave a comment

Please note, comments must be approved before they are published

Newsletter

Don't Take Our Word For it! Here's What Our Customers Think:

Added to cart!
FREE US SHIPPING - Satisfaction Guaranteed Change this XX to Qualify For Free Shipping You Have Achieved Free Shipping We are shipping on time but USPS has announced a potential 1-2 day delay in deliveries Free Shipping For Over $x to Free US Shipping You Have Achieved Free Shipping Change this XX to Qualify For Free Shipping You Have Achieved Free Shipping